The STIHL Rollomatic E Mini Guide Bar 1/4inch P / 1.1mm in a 14inch / 35cm length, is a general-grade laminated guide bar made of high-grade steel.
Designed for use with 61PMM3 or 71PM3 saw chain, it increases cutting efficiency over a PM1 chain by 13%.
Three metal plates are electrically welded together to provide great stability. A sprocket is incorporated in the nose of the bar that carries the saw chain from the top to the bottom of the bar. This not only reduces wear, but also enables the bar nose to be made considerably narrower.
This type of construction is an advantage where extensive use is made of the bar nose (i.e. limbing and boring). All STIHL Rollomatic bars are designed with a narrow nose to help reduce kickback tendencies.
Applications: This bar is primarily intended for use on pole pruners and arborist applications and is is ideally suited to the MSA 200 cordless saw and the MS 194 petrol chainsaw
STIHL recommends using low-kickback, green-labeled chain, and green-labeled reduced-kickback bars on all powerheads.
Note: The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead is installed.
Details
- Brand: STIHL
- Material: High grade steel
- Efficient 14inch /35cm Guide Bar
- Optimised for stability
- Narrow nose reduces kickback
- Suitable for use on pole pruners and arborist applications
- This is a very narrow guide bar which is ideally suited to the MSA 200 cordless saw and the MS 194 petrol chainsaw
- For small link 1/4inch Picco Micro 3 saw chains
- Length 35cm, Width 1.1mm
- All measurements are approximate